This is an old revision of the document!


Table of Contents

TM7705 A/D module

tm7705.jpg

This TM7705 A/D module is manufactured in China and sold as an AD7705 acquisition board with two 16-bit input channels. A 2.5V voltage reference is also on the board.

The TM7705 mimics the operation of the AD7705 and the TM7705 data-sheet, which is only available in Chinese, is similar to the AD7705 original.

Pinout

Module

A1+ o                 VCC         o o  GND
A1- o                 CHIP SEL    o o  RESET
A2+ o                 DATA IN     o o  CLOCK
A2- o                 DATA READY  o o  DATA OUT
          TM7705 I.C.
          
RESET   HAS  10K PULL UP
A1-/A2- HAVE 0R  PULL DOWN

DATA IN  = MOSI
DATA OUT = MISO

Raspberry Pi

The module can easily be connected to the RPi using the following pins.

         +---P1---+
         //      //
3V3      17      18 
MOSI     19      20 GND
MISO     21      22 
SCLK     23      24 CE0
GND      25      26 CE1
         +--------+
         
SCKL = SERIAL CLOCK
CE   = CHIP ENABLE / SELECT

TM7705

As expected the pinout is the same as the AD7705.

       CLOCK     o    o GND
       MCLK IN   o    o VDD
       MCLK OUT  o    o DATA IN
       CHIP SEL  o    o DATA OUT
       RESET     o    o DATA READY
       A2+       o    o A2-
       A1+       o    o REF-
       A1-       o    o REF+

Resources

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies