This is an old revision of the document!


FTDI sio

FTDI chips

FTDI produce a range of serial devices which utilise the FTDI sio driver in Linux with various capabilities.

ECS i-Buddie USB dock

This uses an FT8U100AX USB bridge as seen in the foreground of the picture. This chip combines multiple functions which include serial I/O.

This device fails to operates on correctly on a USB 2.0 port and a connection to a USB 1.1 port or hub is essential.

Identity
Bus 001 Device 016: ID 0403:8372 Future Technology Devices International, Ltd FT8U100AX Serial Port

FTDI UM232R

FTDI UM232R

dsPIC33EV

This board is manufactured by FTDI as an FT232-RL evaluation kit which has an almost full break-out of the chip pins. The jumpers either select bus power or isolate the device and also allow to selection of either 3V3 or 5V I/O.

Identity
Bus 006 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Pinout
            UM232R
DB0 TXD  1  J1-123  24 GND 
DB4 DTR#               CB0
DB2 RTS#               CB1
VIO                    VCC
DB1 RXD                RST
DB7 RI#                3V3
GND                    CB3
DB5 DSR#               PU1
DB6 DCD#               PU2
DB3 CTS#               VCC
CB4          J2-21     USB
CB2      12         13 SLD
           USB SOCKET
         
J1
 1-2  VIO = 3V3
 2-3  VIO = VCC (DEFAULT)

J2
 ON   VCC = USB (DEFAULT)
 OFF  VCC = SELF
EEPROM

sudo ft232r_prog –dump

       eeprom_size = 128
         vendor_id = 0x0403
        product_id = 0x6001
      self_powered = 0
     remote_wakeup = 1
suspend_pull_downs = 0
     max_bus_power = 100 mA
      manufacturer = FTDI
           product = UM232R USB <-> Serial
         serialnum = FT90IYOQ
   high_current_io = 0
  load_d2xx_driver = 0
      txd_inverted = 0
      rxd_inverted = 0
      rts_inverted = 0
      cts_inverted = 0
      dtr_inverted = 0
      dsr_inverted = 0
      dcd_inverted = 0
       ri_inverted = 0
           cbus[0] = RxLED
           cbus[1] = TxLED
           cbus[2] = PwrEn
           cbus[3] = PwrEn
           cbus[4] = Sleep

FT232-RL clone

Devices as the one in the background of the top picture are generally FT232-RL clones yet they can easily achieve 1 megabaud. 2 megabaud has also been tested but not extensively. They also support the libftdi API in Linux.

Identity
Bus 001 Device 019: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Pinout
         USB SOCKET
PWREN                     DCD
TXDEN                     DSR
SLEEP                     GND
CTS                       RI
3.3V                      RXD
5V                        VIO
RXLED      JUMPER         RTS
TXLED      5V-3.3V        DTR
GND                       TXD
    DTR RX TX VCC CTS GND
    
JUMPER SELECTS VIO
EEPROM

sudo ft232r_prog –dump

       eeprom_size = 128
         vendor_id = 0x0403
        product_id = 0x6001
      self_powered = 0
     remote_wakeup = 1
suspend_pull_downs = 0
     max_bus_power = 90 mA
      manufacturer = FTDI
           product = FT232R USB UART
         serialnum = A50285BI
   high_current_io = 0
  load_d2xx_driver = 0
      txd_inverted = 0
      rxd_inverted = 0
      rts_inverted = 0
      cts_inverted = 0
      dtr_inverted = 0
      dsr_inverted = 0
      dcd_inverted = 0
       ri_inverted = 0
           cbus[0] = TxLED
           cbus[1] = RxLED
           cbus[2] = TxDEN
           cbus[3] = PwrEn
           cbus[4] = Sleep

Resources

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies