This is an old revision of the document!
Table of Contents
ARM Amba UART
These UARTs are found on systems such as the Raspberry Pi.
Files at ARM
Files at RPi
RPi
By default, the UART is used as the Linux console, this must be disabled to allow general purpose operation.
#!/bin/sh
C=`awk '{ for (i = 1; i <= NF; ++i) { if ($i !~ /ttyAMA0/) { printf $i" " } } printf "\n" }' /boot/cmdline.txt`
echo $C > /boot/cmdline.txt
/boot/config.txt
High speed modes of operation are also not enabled by default and these must be enabled in /boot.
init_uart_clock=64000000
