PIC32Prog programs PIC32 controllers via a number of back-ends on a variety of platforms.

The version of PIC32Prog available from GitHub is compatible with Nanu Nanu at 115200 baud. Soon it will support user-defined bit rates to allow 57600 baud operation.

apt-get install libusb-1.0-0-dev                                                       
apt-get install libudev-dev  
git clone https://github.com/sergev/pic32prog.git
cd pic32prog.git
sed -i 's/ludev/ludev -lrt/' makefile
make
make install

In this example we program the Ape65 MX150 firmware with a Nano 3.0 clone running Nanu Nanu (see photo).

pic32prog -d /dev/ttyUSB0 mx150.hex 
Programmer for Microchip PIC32 microcontrollers, Version 2.0.833c15f
    Copyright: (C) 2011-2015 Serge Vakulenko
      Adapter: STK500v2 Bootloader
 Program area: 1d000000-1d07ffff
    Processor: Bootloader
 Flash memory: 512 kbytes
  Boot memory: 12 kbytes
         Data: 55492 bytes
        Erase: done
Program flash: ######################################################### done
 Program boot: ### done      
 Verify flash: ######################################################## done
  Verify boot: ## done       
Rate: 1457 bytes per second