This is an old revision of the document!
CORE 0
echo "exit" | /opt/JLink/JLinkExe -device RP2040_M0_0 -if swd -speed 4000 -autoconnect 1 -nogui 1 SEGGER J-Link Commander V7.82a (Compiled Oct 31 2022 11:25:49) DLL version V7.82a, compiled Oct 31 2022 11:25:22 Connecting to J-Link via USB...O.K. Firmware: J-Link EDU Mini V1 compiled Oct 21 2022 11:17:52 Hardware version: V1.00 J-Link uptime (since boot): 0d 00h 09m 41s S/N: 801011752 License(s): FlashBP, GDB USB speed mode: Full speed (12 MBit/s) VTref=3.259V Device "RP2040_M0_0" selected. Connecting to target via SWD ConfigTargetSettings() start J-Link script: ConfigTargetSettings() ConfigTargetSettings() end Found SW-DP with ID 0x0BC12477 DPIDR: 0x0BC12477 CoreSight SoC-400 or earlier Scanning AP map to find all available APs AP[1]: Stopped AP scan as end of AP map has been reached AP[0]: AHB-AP (IDR: 0x04770031) Iterating through AP map to find AHB-AP to use AP[0]: Core found AP[0]: AHB-AP ROM base: 0xE00FF000 CPUID register: 0x410CC601. Implementer code: 0x41 (ARM) Found Cortex-M0 r0p1, Little endian. FPUnit: 4 code (BP) slots and 0 literal slots CoreSight components: ROMTbl[0] @ E00FF000 [0][0]: E000E000 CID B105E00D PID 000BB008 SCS [0][1]: E0001000 CID B105E00D PID 000BB00A DWT [0][2]: E0002000 CID B105E00D PID 000BB00B FPB Cortex-M0 identified.
CORE 1
echo "exit" | /opt/JLink/JLinkExe -device RP2040_M0_1 -if swd -speed 4000 -autoconnect 1 -nogui 1 SEGGER J-Link Commander V7.82a (Compiled Oct 31 2022 11:25:49) DLL version V7.82a, compiled Oct 31 2022 11:25:22 Connecting to J-Link via USB...O.K. Firmware: J-Link EDU Mini V1 compiled Oct 21 2022 11:17:52 Hardware version: V1.00 J-Link uptime (since boot): 0d 00h 09m 48s S/N: 801011752 License(s): FlashBP, GDB USB speed mode: Full speed (12 MBit/s) VTref=3.260V Device "RP2040_M0_1" selected. Connecting to target via SWD ConfigTargetSettings() start J-Link script: ConfigTargetSettings() ConfigTargetSettings() end Found SW-DP with ID 0x0BC12477 DPIDR: 0x0BC12477 CoreSight SoC-400 or earlier Scanning AP map to find all available APs AP[1]: Stopped AP scan as end of AP map has been reached AP[0]: AHB-AP (IDR: 0x04770031) Iterating through AP map to find AHB-AP to use AP[0]: Core found AP[0]: AHB-AP ROM base: 0xE00FF000 CPUID register: 0x410CC601. Implementer code: 0x41 (ARM) Found Cortex-M0 r0p1, Little endian. FPUnit: 4 code (BP) slots and 0 literal slots CoreSight components: ROMTbl[0] @ E00FF000 [0][0]: E000E000 CID B105E00D PID 000BB008 SCS [0][1]: E0001000 CID B105E00D PID 000BB00A DWT [0][2]: E0002000 CID B105E00D PID 000BB00B FPB Cortex-M0 identified.
https://github.com/raspberrypi/pico-sdk
