This is an old revision of the document!
Table of Contents
Olimex AVR MT128
Atmel ATmega128 development board.
Plugging this board into a usbtiny or usbasp connected to a RPi has the tendency to crash the Pi due to inrush current into this board. It is more sensible to utilise a usbasp which can remove the power to the target and power this board using the its AC input.
Test
avrdude -c usbtiny -p m128 avrdude: AVR device initialized and ready to accept instructions Reading | ################################################## | 100% 0.01s avrdude: Device signature = 0x1e9702 (probably m128) avrdude: safemode: Fuses OK (E:FF, H:09, L:CF) avrdude done. Thank you.
