You are here: start » interfaces » pony

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
interfaces:pony [2014/12/20 20:03] – darroninterfaces:pony [2015/03/22 21:55] (current) – external edit 127.0.0.1
Line 1: Line 1:
-==== Pony ====+==== Pony Serial ====
 <wrap right> <wrap right>
 {{:interfaces:pony.jpg?200}} {{:interfaces:pony.jpg?200}}
 </wrap> </wrap>
  
-Pony is a serial interface adapter for ATMEL ISP.+Pony Serial is an interface adapter for ATMEL ISP.
  
 It only works with a motherboard UART or equivalent. It only works with a motherboard UART or equivalent.
  
-== udev == +=== Linux ===
-<code> +
-SUBSYSTEMS=="usb",ATTRS{idVendor}=="16c0",ATTRS{idProduct}=="05dc",\ +
-    MODE:="0666" +
-</code>+
  
 == Program == == Program ==
Line 18: Line 14:
 avrdude -P /dev/ttyS0 -c ponyser ... avrdude -P /dev/ttyS0 -c ponyser ...
 </code> </code>
 +
 +=== Resources ===
 +
 +[[https://www.olimex.com/Products/AVR/Programmers/AVR-PG1B/resources/AVR-PG1B-sch.gif|Schematic]]\\
 +[[https://www.olimex.com/Products/AVR/Programmers/AVR-PG1B/resources/AVR-PG1B.pdf|Manual]]
 +
 +