You are here: start » interfaces » pl2303

Differences

This shows you the differences between two versions of the page.

--- interfaces:pl2303 [2015/01/07 14:47] – darron
+++ interfaces:pl2303 [2023/06/11 19:52] (current) – [TTL cable] darron
@@ Line 4: / Line 4: @@
 \\ \\
 {{ :interfaces:16f648a.jpg?200}}
+\\ \\
+{{ interfaces:ttl_cable.jpg?200}}
 </wrap>
@@ Line 11: / Line 13: @@
 == udev /dev/ttyPL2303 ==
 <code>
 KERNEL=="ttyUSB*",\
@@ Line 21: / Line 24: @@
 == udev by-id ==
 <code>
 /dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0
 </code>
-udev by-id is not supported by the k8048 Microchip PIC programmer.
-=== k8048 Microchip PIC programmer ===
+=== TTL cable ===
+Wiring guide is the inverse of normal and there is no guarantee that this
+is consistent for all devices.
+<code>
+RED 5V
+BLACK GND
+GREEN RX (TARGET RX)
+WHITE TX (TARGET TX)
+</code>
+=== Pickle Microchip PIC ICSP ===
 == Velleman K8048 Configuration ==
 <code>
-DEVICE=/dev/ttyUSB0
+DEVICE=TTY
+IFACE=/dev/ttyUSB0
 SLEEP=600
 BITRULES=0x001F
 </code>