Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
interfaces:pican [2022/12/07 16:56] – [Pinout] darroninterfaces:pican [2024/07/10 12:29] (current) – external edit 127.0.0.1
Line 45: Line 45:
 ===Termination=== ===Termination===
  
-There is a termination resistor closed using JP3.+There is a termination resistor closed with JP3.
  
 === Test === === Test ===
Line 76: Line 76:
  
 <code> <code>
-5 4 3 2 +2 3 4 5 
- 9 8 7 6+ 7 8 9
  
 STANDARD        OBDII STANDARD        OBDII
 2 CAN L         2 GND          SJ1 2 CAN L         2 GND          SJ1
 3 GND           3 CAN H        SJ2 3 GND           3 CAN H        SJ2
-6 GND           5 CAN L        SJ3 +7 CAN H         5 CAN L        SJ3
-7 CAN H+
  
 Solder bridges must be created to select the function of the socket. Solder bridges must be created to select the function of the socket.
Line 89: Line 88:
 === Resources === === Resources ===
  
-[[https://wiki.kewl.org/downloads/pican_rev_B.pdf|Schematic]]+[[https://web.archive.org/web/20160104025419/http://www.skpang.co.uk/catalog/pican-canbus-board-for-raspberry-pi-p-1196.html|Product page]] 
 + 
 +{{downloads:pican_rev_B.pdf|Schematic}}