Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
interfaces:fs1000a [2016/03/23 19:55] darroninterfaces:fs1000a [2016/03/23 19:55] (current) darron
Line 22: Line 22:
  
 To complement the FS1000A, the RF-5V (or equivalent) exists. This receiver To complement the FS1000A, the RF-5V (or equivalent) exists. This receiver
-module works okay at 3V3 for short distances but is rated for 5V operation. It would appear+module works okay at 3V3 for short distances but is rated for 5V operation 
 +which is needed for longer distances. It would appear
 that 5V is required to operate the AGC circuit on the board. The AGC can that 5V is required to operate the AGC circuit on the board. The AGC can
 produce high levels of noise on the output when no signal is broadcast from produce high levels of noise on the output when no signal is broadcast from