You are here: start » interfaces » draginoshield

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
interfaces:draginoshield [2024/09/02 23:24] – darroninterfaces:draginoshield [2024/09/03 12:10] (current) – [Dragino Lora Shield] darron
Line 7: Line 7:
 </wrap> </wrap>
  
-This `shield' contains an SX1276 LoRa radio and a voltage level converter to allow it to be+This `shield' contains an [[:interfaces:semtech|SX1276]] LoRa radio and a voltage level converter to allow it to be
 used on both 3V3 and 5V host boards. used on both 3V3 and 5V host boards.
  
 ===Bare-metal=== ===Bare-metal===
  
-My [[projects:laura|Laura]] project can utilise this board on a UNO or MEGA2560.+My [[projects:laura|Laura long range radio]] project can utilise this board with an Arduino UNO or Arduino MEGA2560.
  
 ===Arduino=== ===Arduino===
Line 28: Line 28:
 [[https://github.com/mcci-catena/arduino-lmic|Arduino LMIC]] [[https://github.com/mcci-catena/arduino-lmic|Arduino LMIC]]
  
-==Program==+==Upload==
  
 This [[https://www.mobilefish.com/developer/lorawan/lorawan_quickguide_build_lora_node_dragino_shield_arduino_uno.html|guide]] explains how to load and edit the `sketch' for the Arduino UNO. This [[https://www.mobilefish.com/developer/lorawan/lorawan_quickguide_build_lora_node_dragino_shield_arduino_uno.html|guide]] explains how to load and edit the `sketch' for the Arduino UNO.