Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
interfaces:aht10 [2022/10/29 16:07] darroninterfaces:aht10 [2022/10/29 17:34] (current) – [AHT10 dual-purpose sensor] darron
Line 7: Line 7:
  
 This dual-purpose sensor is used to measure temperature and humidity. This dual-purpose sensor is used to measure temperature and humidity.
-It operates as an I2C slave device, however, it has a hardware bug which means it cannot share the bus with any other device.+It operates as an I2C slave device.
  
-The actual sensor is tiny but a board is available from China with the I2C connections+The sensor is tiny IC but a board is available from China with the I2C connections
 and power on a standard 0.1 inch header which makes it easily accessible. and power on a standard 0.1 inch header which makes it easily accessible.
 +
 +WARNING: The AHT10 has a hardware bug which means it cannot share the bus with any other device.
 +
 +Refer to data-sheet figure 11 comment 3: Only a single AHT10 can be connected to the I2C bus and no other I2C
 +devices can be connected.
 +
  
 ===API=== ===API===