You are here: start » tools » stm32flash

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
tools:stm32flash [2015/01/02 22:57]
darron 		tools:stm32flash [2015/03/22 21:55] (current)
Line 1: Line 1:
 ==== STM32Flash ==== ==== STM32Flash ====
  
-== Install ==+STM32FLash is used to program STM32 CPUs on various ARM boards via a serial interface. 
 + 
 +=== Install ===
 <code> <code>
 mkdir -p /opt/src mkdir -p /opt/src
Line 11: Line 13:
 </code> </code>
  
-== Test == +=== Test === 
-This test was on the STM32 Value line discovery board using PA10/PA9.+This test was on the STM32 Value line discovery board using PA10/PA9. Boot was pulled high via 220R.
  
 It took a few attempts to synchronise. It took a few attempts to synchronise.
  
 <code> <code>
-beethoven:/opt/src/stm32flash> stm32flash -b 115200 /dev/ttyCP2102+stm32flash -b 115200 /dev/ttyCP2102
 stm32flash 0.4 stm32flash 0.4