You are here: start » tools » lxc

Differences

This shows you the differences between two versions of the page.

--- tools:lxc [2022/09/01 18:25]
darron [Configure]
+++ tools:lxc [2024/04/28 18:47] (current)
darron [Initialise]
@@ Line 2: / Line 2: @@
 Linux containers (LXC) is the Linux implementation of FreeBSD Jails.
-This page mostly covers usage in debian, however, due to limitations
-there it's best to adapt this to ubuntu instead. Only minor differences
-exist and they are not mentioned.
 Within a Linux container we can run a self-contained installation of Linux
@@ Line 16: / Line 12: @@
 <code>
-apt-get install lxc lxc-templates bridge-utils cgroupfs-mount
+apt-get install lxc lxc-templates bridge-utils cgroupfs-mount conntrack iptables debootstrap
 /etc/init.d/cgroupfs-mount start
 </code>
@@ Line 35: / Line 31: @@
 ==systemd==
 <code>
+systemctl disable lxc-monitord.service
+systemctl mask lxc-monitord.service
 systemctl disable lxc-net.service
 systemctl disable lxc.service
@@ Line 42: / Line 40: @@
 <code>
-sed -i 's/LXC_AUTO="true"/LXC_AUTO="false"/ /etc/default/lxc
+sed -i 's/LXC_AUTO="true"/LXC_AUTO="false"/g' /etc/default/lxc
-sed -i 's/USE_LXC_BRIDGE="true"/USE_LXC_BRIDGE="false"/ /etc/default/lxc-net
+sed -i 's/USE_LXC_BRIDGE="true"/USE_LXC_BRIDGE="false"/g' /etc/default/lxc-net
 </code>
@@ Line 82: / Line 80: @@
 <code>
-#!/bin/sh
+#! /bin/sh
-PATH=/sbin
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
 iptables -t filter -F
@@ Line 89: / Line 87: @@
 iptables -t raw -F
 iptables -t nat -F
-/usr/sbin/conntrack -F
+conntrack -F
 # raw:PREROUTING
@@ Line 109: / Line 107: @@
 iptables -t nat -A POSTROUTING -o eth0 -s 10.10.10.0/24 -d 0/0 -j MASQUERADE
-sysctl -w net.bridge.bridge-nf-call-ip6tables=0
-sysctl -w net.bridge.bridge-nf-call-iptables=0
-sysctl -w net.bridge.bridge-nf-call-arptables=0
 sysctl -w net.ipv4.ip_forward=1
 sysctl -w net.ipv4.conf.all.proxy_arp=1
 sysctl -w net.netfilter.nf_conntrack_max=524288
-sysctl -w net.ipv4.netfilter.ip_conntrack_tcp_timeout_established=7440
+sysctl -w net.netfilter.nf_conntrack_tcp_timeout_established=7440
 echo 65536 > /sys/module/nf_conntrack/parameters/hashsize
 echo "1024 65535" > /proc/sys/net/ipv4/ip_local_port_range
@@ Line 140: / Line 137: @@
 <code>
+mkdir -p /var/cache/lxc/debian
 wget "https://ftp-master.debian.org/keys/release-10.asc"
+gpg --no-default-keyring --keyring /var/cache/lxc/debian/archive-key.gpg --import release-10.asc
 wget "https://ftp-master.debian.org/keys/release-11.asc"
-gpg --no-default-keyring --keyring /var/cache/lxc/debian/archive-key.gpg --import release-10.asc
 gpg --no-default-keyring --keyring /var/cache/lxc/debian/archive-key.gpg --import release-11.asc
 </code>
@@ Line 157: / Line 155: @@
 lxc-create -n terminator -t debian -- -r bullseye -a armhf
 </code>
-=== Configure ===
-==/var/lib/lxc/HOSTNAME/config==
+Install bookworm (32-bit)
-__Obsolete Debian template__
 <code>
-# Template used to create this container: /usr/share/lxc/templates/lxc-debian
+lxc-create -n cracker -t debian -- -r bookworm -a armhf
-# Parameters passed to the template: -r wheezy -a amd64
-# For additional config options, please look at lxc.container.conf(5)
-lxc.rootfs = /var/lib/lxc/HOSTNAME/rootfs
-# Common configuration
-lxc.include = /usr/share/lxc/config/debian.common.conf
-# Container specific configuration
-lxc.mount = /var/lib/lxc/HOSTNAME/fstab
-lxc.utsname = HOSTNAME
-lxc.arch = amd64
-# Network
-lxc.network.type = veth
-lxc.network.flags = up
-# that's the interface defined above in host's interfaces file
-lxc.network.link = lxcbr0
-# name of network device inside the container,
-# defaults to eth0, you could choose a name freely
-lxc.network.name = lxcnet0
-lxc.network.hwaddr = 00:FF:AA:00:00:01
-lxc.network.veth.pair = veth1
-# the ip may be set to 0.0.0.0/24 or skip this line
-# if you like to use a dhcp client inside the container
-lxc.network.ipv4 = 10.10.10.10/24
-# define a gateway to have access to the internet
-lxc.network.ipv4.gateway = 10.10.10.1
-# Autostart
-lxc.start.auto = 1
-lxc.start.delay = 5
-lxc.start.order = 100
 </code>
+=== Configure ===
-__Modern Debian template__
+==/var/lib/lxc/HOSTNAME/config==
 <code>
@@ Line 216: / Line 175: @@
 # (Be aware this has security implications)
-lxc.net.0.type = empty
+#lxc.net.0.type = veth
+#lxc.net.0.hwaddr = 00:XX:XX:XX:XX:XX
+#lxc.net.0.link = lxcbr0
+#lxc.net.0.flags = up
 lxc.apparmor.profile = generated
 lxc.apparmor.allow_nesting = 1
@@ Line 239: / Line 201: @@
 lxc.net.0.veth.pair = veth0
 lxc.net.0.ipv4.address = ?/24
-lxc.net.0.ipv6.address = ?
 lxc.net.0.ipv4.gateway = ?
-lxc.net.0.ipv6.gateway = ?
+#lxc.net.0.ipv6.address = ?
+#lxc.net.0.ipv6.gateway = ?
-# You may need the following for initial boot (Devuan)
-# You can replace systemd with runit afterwards by changing the lxc.init.cmd before rebooting
+# You may need the following for initial boot
+#
+# You can replace systemd by changing the lxc.init.cmd before rebooting
+#
 lxc.cgroup.devices.allow =
 lxc.cgroup.devices.deny =
@@ Line 283: / Line 245: @@
 some user ids to map to the container then configure it.
-This has been tested to work Ubuntu vivid. It failed to operate on Debian
+This has been tested to work Ubuntu vivid and nothing else since.
-at this time due to set up of /dev within the container and possibly other issues.
 When assigning a range of ids to the root user. Choose what is available, here i
 chose 200000 because this was free.
 <code>
 usermod --add-subuids 200000-265535 root
@@ Line 308: / Line 270: @@
 Now we can start and stop the container, attach to it, etc.
+===Runit===
+Start container and login as root
+<code>
+lxc-start -F -n container
+</code>
+Install runit. It will ask you to enter a phrase and after installation reboot.
+<code>
+apt install runit-init
+reboot
+</code>
+Login to tidy up.
+<code>
+lxc-attach -n container
+cd /etc/service
+rm getty-tty*
+</code>

Differences

start

tools

advertisement

Toolbox