You are here: start » tools » libopencm3

Differences

This shows you the differences between two versions of the page.

--- tools:libopencm3 [2015/01/02 02:35]
darron
+++ tools:libopencm3 [2022/12/18 21:10] (current)
@@ Line 1: / Line 1: @@
-==== OpenCM3 ====
+==== libopencm3 ====
-OpenCM3 is a firmware library for embedded ARM CPUs.
+libopencm3 is a firmware library for embedded ARM CPUs.
-== Install ==
+The firmware library was built with [[:tools:gccarm|this]] compiler.
+=== Install ===
 <code>
-git clone git://github.com/libopencm3/libopencm3.git
+mkdir -p /opt/src
+cd /opt/src
+git clone http://github.com/libopencm3/libopencm3.git
 cd libopencm3
-make
+make PREFIX=/usr/bin/arm-none-eabi-
+cp -Rpa /opt/src/libopencm3 /opt/libopencm3
 </code>
-== Examples ==
+=== Examples ===
 <code>
+mkdir -p /opt/src
+cd /opt/src
 git clone https://github.com/libopencm3/libopencm3-examples.git
 cd libopencm3-examples
 git submodule init
 git submodule update
-make
+make PREFIX=/usr/bin/arm-none-eabi-
-cd examples/stm32/f1/stm32vl-discovery/fancyblink/
-arm-none-eabi-objcopy -Obinary fancyblink.elf fancyblink.bin
-st-flash write v1 fancyblink.bin 0x8000000
 </code>
+=== Resources ===
+[[https://github.com/libopencm3/libopencm3/wiki|Wiki]]
+[[https://github.com/libopencm3/libopencm3|Project page]]