You are here: start » tools » libmaple

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

tools:libmaple [2015/03/18 15:47]
darron [Demo] 		tools:libmaple [2015/03/22 21:55]
Line 1: Line 1:
-==== libmaple ==== 
- 
-libmaple is a firmware library for the Leaflabs maple mini and clones with STM32 CPUs. 
- 
-The firmware library is built with [[:tools:gccarm|this]] compiler. 
- 
-=== Download === 
-<code> 
-mkdir -p /embedded/arm-cortex/src 
-cd /embedded/arm-cortex/src 
-git clone https://github.com/leaflabs/libmaple.git 
-cd libmaple 
-</code> 
- 
-=== Help === 
- 
-<code> 
-make CROSS_COMPILE=/embedded/arm-cortex/gcc-arm-none-eabi-4_9-2014q4/bin/arm-none-eabi- help 
- 
-Basic usage (BOARD defaults to maple): 
-    $ cp your-main.cpp main.cpp 
-    $ make BOARD=your_board 
-    $ make BOARD=your_board install 
- 
-(Multiple source files? Link with libmaple.a (`$ make library') 
-or hack build-targets.mk appropriately.) 
- 
-Important targets: 
-    sketch:   Compile for BOARD to MEMORY_TARGET (default). 
-    install:  Compile and upload over USB using Maple bootloader 
- 
-You *must* set BOARD if not compiling for Maple (e.g. 
-use BOARD=maple_mini for mini, etc.), and MEMORY_TARGET 
-if not compiling to Flash. Run `$ make list-boards' for 
-a list of all boards. 
- 
-Valid MEMORY_TARGETs (default=flash): 
-    ram:    Compile to RAM (doesn't touch Flash) 
-    flash:  Compile to Flash (for Maple bootloader) 
-    jtag:   Compile for JTAG/SWD upload (overwrites bootloader) 
- 
-Other targets: 
-    clean: Remove all build and object files 
-    doxygen: Build Doxygen HTML and XML documentation 
-    help: Show this message 
-    mrproper: Remove all generated files 
-</code> 
- 
-=== List boards === 
-<code> 
-make CROSS_COMPILE=/embedded/arm-cortex/gcc-arm-none-eabi-4_9-2014q4/bin/arm-none-eabi- list-boards 
- cm900 
- maple_mini 
- maple 
- maple_native 
- maple_RET6 
- nucleo 
- olimex_stm32_h103 
- opencm904 
- st_stm3220g_eval 
- VLDiscovery   
-</code> 
- 
-=== Demo === 
- 
-This is a standard LED demo for the maple mini. You may edit the example create a blink unlike the default empty firmware blink to confirm that this is working. 
-<code> 
-cp examples/blinky.cpp main.cpp 
-make CROSS_COMPILE=/embedded/arm-cortex/gcc-arm-none-eabi-4_9-2014q4/bin/arm-none-eabi- BOARD=maple_mini install 
-</code> 
-