You are here: start » tools » devuan

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
tools:devuan [2019/08/24 16:14]
darron 		tools:devuan [2019/08/24 17:31] (current)
darron [Install Broadcom WiFi driver (if present)]
Line 65: Line 65:
 Mount the system partition and set up networking. This Mount the system partition and set up networking. This
 will allow us to login after the Pi boots and finalise the will allow us to login after the Pi boots and finalise the
-set up. Use eth0 or supported WiFi adapter, Eg. BELKIN +set up.
-FD?????.+
  
 <code> <code>
Line 73: Line 72:
 vi /mnt/etc/resolv.conf vi /mnt/etc/resolv.conf
 </code> </code>
 +
 +If you need to use WiFI, Eg. BELKIN FD00000, place the
 +firmware in /lib/firmware (rt73.bin).
  
 Un mount the system partition. Un mount the system partition.
Line 82: Line 84:
  
 === Install Broadcom WiFi driver (if present)=== === Install Broadcom WiFi driver (if present)===
- 
-To-do 
- 
-=== Disable undesired services === 
  
 <code> <code>
-update-rc.d dhcpcd disable +apt-get install firmware-brcm80211 
-update-rc.d motd disable +wget -q https://raw.githubusercontent.com/RPi-Distro/firmware-nonfree/master/brcm/brcmfmac43430-sdio.txt -O /lib/firmware/brcm/brcmfmac43430-sdio.txt
-update-rc.d triggerhappy disable +
-update-rc.d cron disable +
-update-rc.d dbus disable +
-update-rc.d dphys-swapfile disable +
-update-rc.d ntp disable +
-update-rc.d avahi-daemon disable +
-update-rc.d bluetooth disable +
-update-rc.d plymouth disable +
-update-rc.d paxctld disable+
 </code> </code>
 +=== Disable undesired services ===
  
 Edit /etc/inittab and disable unnecessary gettys and reboot. Edit /etc/inittab and disable unnecessary gettys and reboot.
  
-=== Set up swap === 
  
-Because we disabled the useless swap generator, do it by hand. 
-<code> 
-swapoff /var/swap 
-dd if=/dev/zero of=/var/swap bs=4M count=512 
-mkswap /var/swap 
-echo "/var/swap none swap sw 0 0" >> /etc/fstab 
-reboot 
-</code> 
  
 === Finish off === === Finish off ===