This is an old revision of the document!
Mindy Microchip PIC32MX ICSP
Mindy is a port of Mork which in turn is an adaptation of Nanu nanu Microchip PIC ICSP. This time Mindy is for PIC32 based boards such as the chipKITPi and the SDXL.
Licence
Mork is licensed under same terms as Pickle Microchip PIC ICSP which is the source of the software used to create this project. The Pickle LICENCE is found here. This licence details the rights and liabilities of using the application and it should be especially understood that I, the author, will not accept any responsibility for any side effects of running it. Do not download and use this firmware unless you are willing to accept the consequences of it failing for any reason.
Credits
This software was written by Darron M Broad and is an adaptation of Pickle Microchip PIC ICSP.
Install
To-do
Program
pic32prog -S -d /dev/ttyACM0 mx150.hex
Programmer for Microchip PIC32 microcontrollers, Version 2.0.9986ac0
Copyright: (C) 2011-2015 Serge Vakulenko
Adapter: STK500v2 Bootloader
Program area: 1d000000-1d07ffff
Processor: Bootloader
Flash memory: 512 kbytes
Boot memory: 12 kbytes
Data: 55500 bytes
Erase: done
Program flash: ######################################################### done
Program boot: ### done
Rate: 23799 bytes per second
Verify
pic32prog -v -d /dev/ttyACM0 mx150.hex
Programmer for Microchip PIC32 microcontrollers, Version 2.0.9986ac0
Copyright: (C) 2011-2015 Serge Vakulenko
Adapter: STK500v2 Bootloader
Program area: 1d000000-1d07ffff
Processor: Bootloader
Flash memory: 512 kbytes
Boot memory: 12 kbytes
Data: 55500 bytes
Verify flash: ######################################################## done
Verify boot: ## done
Rate: 27165 bytes per second
