You are here: start » boards » yl34

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
boards:yl34 [2022/11/10 15:27]
darron [Test] 		boards:yl34 [2022/11/10 21:51] (current)
darron [JTAG]
Line 1: Line 1:
 ==== YL-34 ==== ==== YL-34 ====
 <wrap right> <wrap right>
-{{:boards:yl-40.jpg?200}} +{{:boards:mega16_minimium_system_schematic.jpg?100}} {{:boards:atmega32.jpg?100}}
-\\ \\ +
-{{:boards:mega16_minimium_system_schematic.jpg?200}} +
-\\ \\ +
-{{:boards:atmega32.jpg?200}}+
 </wrap> </wrap>
  
 Known as some variation of YL-34 ATMEGA16 ATMEGA32 AVR Minimum System Development Board. Known as some variation of YL-34 ATMEGA16 ATMEGA32 AVR Minimum System Development Board.
- 
-===Test=== 
  
 ===ISP=== ===ISP===
  
-__USBASP__+==USBASP== 
 +<wrap right> 
 +{{:boards:yl-40.jpg?100}} 
 +</wrap>
  
 <code> <code>
-apt install avrdude 
-rehash 
 avrdude -B 50 -c usbasp -p ATMEGA32 avrdude -B 50 -c usbasp -p ATMEGA32
  
Line 33: Line 28:
 </code> </code>
  
-[[https://eleccelerator.com/fusecalc/fusecalc.php?chip=atmega32&LOW=FF&HIGH=19&LOCKBIT=FF|Fuses for the above]]+===JTAG=== 
 + 
 +==ATMEL ICE== 
 +<wrap right> 
 +{{interfaces:ice-jtag.jpg?100}} 
 +</wrap> 
 + 
 +<code> 
 +avrdude -B 5 -c atmelice -p ATMEGA32 
 + 
 +avrdude: AVR device initialized and ready to accept instructions 
 + 
 +Reading | ################################################## | 100% 0.08s 
 + 
 +avrdude: Device signature = 0x1e9502 (probably m32) 
 + 
 +avrdude: safemode: Fuses OK (E:FF, H:19, L:FF) 
 + 
 +avrdude done.  Thank you. 
 +</code> 
 + 
 +<code> 
 +avrdude  -B 1 -c atmelice -p ATMEGA32 
 + 
 +avrdude: AVR device initialized and ready to accept instructions 
 + 
 +Reading | ################################################## | 100% 0.08s 
 + 
 +avrdude: Device signature = 0x1e9502 (probably m32) 
 + 
 +avrdude: safemode: Fuses OK (E:FF, H:99, L:E1) 
 + 
 +avrdude done.  Thank you. 
 +</code> 
 +===Resources=== 
 + 
 +[[https://eleccelerator.com/fusecalc/fusecalc.php?chip=atmega32&LOW=FF&HIGH=19&LOCKBIT=FF|Fuse calculator]] 
 + 
 +[[https://ww1.microchip.com/downloads/en/DeviceDoc/doc2503.pdf|ATmega32 datasheet]]