You are here: start » boards » wb15

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
boards:wb15 [2023/12/07 02:26]
darron [Firmware upgrade blobs] 		boards:wb15 [2023/12/15 07:49] (current)
darron [Upgrade procedure]
Line 15: Line 15:
 WARNING: There is an option byte called ESE on this board, it you WARNING: There is an option byte called ESE on this board, it you
 disable it the board will refuse to operate (untested). disable it the board will refuse to operate (untested).
 +
 +
 +===Pinout===
 +
 +<code>
 +LED
 +PB5 LD1 BLUE
 +PB0 LD2 GREEN
 +PB1 LD3 RED
 +
 +BUTTON
 +PA0   B1
 +PE4   B2
 +PA6   B3
 +RESET B4
 +
 +USART1 (ST-LINK)
 +PA10 TX_STLINK AF7
 +PA9  RX_STLINK AF7
 +
 +X1 NX2016SA 32 MHz
 +OSC_IN
 +OSC_OUT
 +
 +X2 NX2012SA 32.768 kHz
 +PC14 OSC32_IN
 +PC16 OSC32_OUT
 +</code>
 +
 ===Firmware upgrade services=== ===Firmware upgrade services===
  
Line 86: Line 115:
 </code> </code>
  
-Now press firmware upgrade.+Now press firmware upgrade and after start the wireless firmware.
  
 ===Demo firmware=== ===Demo firmware===
Line 204: Line 233:
 </code> </code>
  
-NB char-write-cmd above works in interactive mode but not otherwise. char-write-req fails either way.+NB char-write-cmd above works in interactive mode but not otherwise. char-write-req fails either way since this is setup in the firmware as write without a response.
  
 ==Python== ==Python==
Line 214: Line 243:
  
 [[https://www.st.com/resource/en/data_brief/nucleo-wb15cc.pdf|User manual]] [[https://www.st.com/resource/en/data_brief/nucleo-wb15cc.pdf|User manual]]
 +
 +[[https://www.st.com/resource/en/schematic_pack/mb1641-wb15cc-c01_schematic.pdf|Schematic]]
  
 [[https://www.st.com/en/microcontrollers-microprocessors/stm32wb15cc.html|MCU product page]] [[https://www.st.com/en/microcontrollers-microprocessors/stm32wb15cc.html|MCU product page]]
 +
 +[[https://www.st.com/resource/en/datasheet/stm32wb15cc.pdf|MCU data-sheet]]
 +
 +[[https://www.st.com/resource/en/reference_manual/rm0473-multiprotocol-wireless-32bit-mcu-armbased-cortexm4-with-fpu-bluetooth-low-energy-radio-solution-stmicroelectronics.pdf|MCU reference manual]]
  
 [[https://wiki.stmicroelectronics.cn/stm32mcu/wiki/Connectivity:STM32WB_FUS|Firmware upgrade guide]] [[https://wiki.stmicroelectronics.cn/stm32mcu/wiki/Connectivity:STM32WB_FUS|Firmware upgrade guide]]
Line 222: Line 257:
  
 [[https://www.st.com/resource/en/programming_manual/dm00716581-stm32wb-ble-stack-programming-guidelines-stmicroelectronics.pdf|BLE programming guide]] [[https://www.st.com/resource/en/programming_manual/dm00716581-stm32wb-ble-stack-programming-guidelines-stmicroelectronics.pdf|BLE programming guide]]
 +
 +[[https://www.st.com/resource/en/application_note/dm00771441-stm32h745755-and-stm32h747757-lines-interprocessor-communications-stmicroelectronics.pdf|Dual Core IPCC]]
 +
 +[[https://wiki.st.com/stm32mcu/wiki/Connectivity:STM32WB_BLE_STM32CubeMX|BLE demo application]]