Differences

This shows you the differences between two versions of the page.

--- boards:rkp28sb [2015/01/10 04:19]
darron [I/O]
+++ boards:rkp28sb [2020/12/28 12:36] (current)
@@ Line 1: / Line 1: @@
-==== RK Education RKP28sb ====
+==== RKP28sb ====
 <wrap right>
 {{:boards:rkp28sb.jpg?200}}
@@ Line 51: / Line 51: @@
 :RB3/AN4       RB3 AN9  CCP2  VPO
 :RB4/AN5       RB4 KBI0 AN11
+SCK on J8 connects to LED D3
 </code>
-=== Resources ===
+=== Power ===
-[[http://rkeducation.co.uk/documents/instructions/RKP28sbComponentListandInstructions.pdf|Constructors guide]]\\
-[[http://rkeducation.co.uk/images/Schematics/rkp28shieldbaseschematicpicaxe.jpg|Schematic (jpeg)]]\\
-[[http://rkeducation.co.uk/documents/schematics/rkp28sbschematicshieldforpicaxe.pdf|Schematic (pdf)]]
+Power may be applied through the power jack or the power header. There are two LDOs and a jumper is used to select the MCU voltage between 3V3 or 5V. When applying 5V on the power header, the 3V3 LDO is still utilised so it may be selected.
+When using the power jack socket, the switch will turn the board on and off, as it
+feeds the 5V LDO.
+There is a VUSB selection jumper which may power this pin if the PIC internal regulator is disabled. For PICs that are not USB, remove the jumper and use this a method of accessing pin 14.
+=== Resources ===
+[[https://wiki.kewl.org/downloads/RKP28sbComponentListandInstructions.pdf|Constructors guide]]\\
+[[https://wiki.kewl.org/downloads/rkp28sbschematicshieldforpicaxe.pdf|Schematic]]