You are here: start » boards » mspexp430g2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
boards:mspexp430g2 [2020/12/28 12:34]
darron [Schematics] 		boards:mspexp430g2 [2024/01/03 10:16] (current)
darron [Crystal]
Line 1: Line 1:
 ==== MSP-EXP430G2 Launchpad ==== ==== MSP-EXP430G2 Launchpad ====
 <wrap right> <wrap right>
-{{:boards:microxtal.jpg?100}} 
 {{:boards:msp430.jpg?200}} {{:boards:msp430.jpg?200}}
 +\\ \\
 +{{boards:msp430g2.jpg?200}}
 +\\ \\
 +{{boards:msplpmode.jpg?200}}
 </wrap> </wrap>
  
Line 18: Line 21:
  
 <code> <code>
-USB+      USB 
 +TP3 GND VBUS TP1
                                       J3 = SW UART                                       J3 = SW UART
  
Line 32: Line 36:
 P2.2                                          P2.3 P2.2                                          P2.3
  
-                                               GND 
 P1.3   P1.0 P1.6                   RESET       GND P1.3   P1.0 P1.6                   RESET       GND
-S2     LED1 LED2                   S1          VCC +S2     LED1 LED2                   S1          GND 
-       RED  GREEN+       RED  GREEN                              VCC
 </code> </code>
  
Line 43: Line 46:
 </wrap> </wrap>
  
-First install the [[tools:msp430gcc|development]] and [[tools:mspdebug|programming]] tools.+First install the [[tools:msp430gcc|development]] and [[tools:mspdebug|programming/debugging]] tools.
  
 Demo Demo
Line 73: Line 76:
 and the DIP switches needs to be in the SW UART position to operate. and the DIP switches needs to be in the SW UART position to operate.
 === Crystal === === Crystal ===
 +<wrap right>
 +{{:boards:microxtal.jpg?100}}
 +{{:boards:xtal.png?150}}
 +{{:boards:32k.jpg?150}}
 +</wrap>
 +
  
 When attaching the 32768 Hz crystal, R28 and R29 can be removed to disable header access to XIN and XOUT. When attaching the 32768 Hz crystal, R28 and R29 can be removed to disable header access to XIN and XOUT.
  
 The through holes can be used to attach a generic [[https://wiki.kewl.org/downloads/Ta-1082.pdf|crystal]] The through holes can be used to attach a generic [[https://wiki.kewl.org/downloads/Ta-1082.pdf|crystal]]
-which is easier to solder that the SMD crystal.+which is easier to solder than the SMD crystal.
 === Schematics === === Schematics ===
  
 {{:boards:LaunchPadSheet1.png?200|Debugging and programming}} {{:boards:LaunchPadSheet1.png?200|Debugging and programming}}
 {{:boards:LaunchPadSheet2.png?200|USB interface}} {{:boards:LaunchPadSheet2.png?200|USB interface}}
-{{:boards:LaunchPadSheet3.png?200|MSP430 value line processor}}+{{:boards:LaunchPadSheet3.png?200|MSP430 value line device}}
  
  
Line 88: Line 97:
  
 [[http://www.ti.com/ww/en/launchpad/launchpads-msp430-msp-exp430g2.html|Product page]] [[http://www.ti.com/ww/en/launchpad/launchpads-msp430-msp-exp430g2.html|Product page]]
 +
 +[[https://www.ti.com/lit/ug/slau318g/slau318g.pdf|User manual]]
  
 [[https://www.ti.com/product/MSP430G2452|MSP430G2452 product page]] [[https://www.ti.com/product/MSP430G2452|MSP430G2452 product page]]
Line 93: Line 104:
 [[https://www.ti.com/product/MSP430G2553|MSP430G2553 product page]] [[https://www.ti.com/product/MSP430G2553|MSP430G2553 product page]]
  
-[[https://www.argenox.com/library/msp430/|Tutorial]]+[[https://www.ti.com/lit/pdf/slau144|MSP430F2xx, MSP430G2xx Family User's Guide]]
  
-[[https://github.com/msp430club|Examples]]+[[https://www.ti.com/lit/ug/slau646f/slau646f.pdf|MSP430-GCC user's guide]] 
 + 
 +[[https://www.argenox.com/library/msp430/|Tutorial]]