You are here: start » boards » minikit

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision 		Previous revision
boards:minikit [2015/04/01 22:17]
darron created 		boards:minikit [2015/07/23 20:52] (current)
darron [Pinout]
Line 1: Line 1:
 ==== STM8S Minikit 20 ==== ==== STM8S Minikit 20 ====
 <wrap right> <wrap right>
-{{:boards:minikit.jpg?200|}}+{{:boards:stm8s-2.jpg?200|}}
 </wrap> </wrap>
 +
 +These are very cheap STM8S003F3P6 development boards, however, they demand
 +a [[:interfaces:stclone|SWIM]]  compatible programmer to utilise.
 +
 +There is a `DE' mark on the board which may suggest that Danger
 +Electronics is the manufacturer, however, DE says the device is an
 +STM8S103 but it's actually an STM8S003.
 +
 +The silkscreen also names these the STM8 Minikit 20 but the product
 +page at Danger Electronics names them the STM8S.
 +
 +=== Pinout ===
 +<code>
 +    VDD SWIM GND NRST   USB
 +RST                     PWR
 +BTN
 +                    VIN GND
 +
 +PD4         PWR LED1    PD3
 +PD5         PD3 LED2    PD2
 +PD6                     PD1
 +RST                     PC7
 +PA1                     PC6
 +PA2                     PC5
 +GND                     PC4
 +VCAP      VDD VDD       PC3
 +VDD       GND GND       PB4
 +PA3                     PB5
 +</code>
 +
 +=== LED demo ===
 +
 +Install [[:tools:stm8flash|STM8Flash]] and [[:tools:sdcc|SDCC]].
 +<code>
 +hg clone http://hg.kewl.org/pub/blinky++
 +cd blinky++/STM8S_Minikit_20
 +make
 +make install
 +</code>
 +
 +=== Resources ===
 +[[http://item.taobao.com/item.htm?spm=2013.1.1998246701.3.UUxbS4&scm=1007.10152.5639.i18323182778&id=21072971920&pvid=19cbb386-bb93-4162-a04b-f0fce66f0191|Product page]]