You are here: start » projects » pickle

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
projects:pickle [2023/11/05 18:07]
darron [ICSP interfaces] 		projects:pickle [2023/11/05 18:07] (current)
darron [ICSP interfaces]
Line 58: Line 58:
  
 ^Device^Description^Speed^Data^ ^Device^Description^Speed^Data^
-|[[projects:pickle#bananapi|BPI]]/[[projects:pickle#orangepi0|OPI]](1)|Linux AllWinner Banana Pi (A20) and Orange Pi (H2+/H3) GPIO.|Fast|[[:boards:bpi|BPi]] [[:boards:opi0|OPi0]]|+|[[projects:pickle#bananapi|BPI]]/[[projects:pickle#orangepi0|OPI]] (1)|Linux AllWinner Banana Pi (A20) and Orange Pi (H2+/H3) GPIO.|Fast|[[:boards:bpi|BPi]] [[:boards:opi0|OPi0]]|
 |[[projects:pickle#linuxcp2104|CP2104]]    |Linux CP2104 GPIO.|Slow|CP210x_VCP_Linux_3.13| |[[projects:pickle#linuxcp2104|CP2104]]    |Linux CP2104 GPIO.|Slow|CP210x_VCP_Linux_3.13|
 |[[projects:pickle#linuxftdi|FTDI]]        |Linux FTDI USB bit-bang.|Slow|libftdi or libftdi1| |[[projects:pickle#linuxftdi|FTDI]]        |Linux FTDI USB bit-bang.|Slow|libftdi or libftdi1|
Line 68: Line 68:
 |[[projects:pickle#linuxpcf8574|PCF8574]]  |Linux PCF8574 I2C.|Slow|Single data I/O| |[[projects:pickle#linuxpcf8574|PCF8574]]  |Linux PCF8574 I2C.|Slow|Single data I/O|
 |SYSFSGPIO|Linux SYSFS|Slow|Single data I/O| |SYSFSGPIO|Linux SYSFS|Slow|Single data I/O|
-|[[projects:pickle#rpi1|RPI]](2)          |Linux Raspberry Pi GPIO (Pi0/Pi1/Pi2/Pi3/Pi4).|Fast|[[:boards:rpi|RPi]] [[:boards:chipkitpi|chipKITPi]]|+|[[projects:pickle#rpi1|RPI]] (2)          |Linux Raspberry Pi GPIO (Pi0/Pi1/Pi2/Pi3/Pi4).|Fast|[[:boards:rpi|RPi]] [[:boards:chipkitpi|chipKITPi]]|
 |[[projects:pickle#k8048tty|TTY]]          |POSIX Serial bit-bang.|Variable|8250/16550 is fast, USB is slow, Eg. [[:interfaces:cp2102|CP2102]]| |[[projects:pickle#k8048tty|TTY]]          |POSIX Serial bit-bang.|Variable|8250/16550 is fast, USB is slow, Eg. [[:interfaces:cp2102|CP2102]]|
  
-(1) Memory mapped I/O on BPI can cause a lock-up on latest kernels. Use GPIO-BB instead. +(1) Memory mapped I/O on BPI can cause a lock-up on latest kernels. Use GPIO-BB instead.\\
 (2) Board auto-detect does not work with newer Kernels. (2) Board auto-detect does not work with newer Kernels.