You are here: start » projects » oxford

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
projects:oxford [2017/02/08 21:23]
darron 		projects:oxford [2017/02/24 16:31] (current)
darron [Devices]
Line 12: Line 12:
 For the UART interface any of a number of serial interfaces may For the UART interface any of a number of serial interfaces may
 be used which includes bluetooth devices such as the [[interfaces:bt0417c|HC-05]]. be used which includes bluetooth devices such as the [[interfaces:bt0417c|HC-05]].
 +
 +=== Devices ===
 +
 +At this time 489 devices are thought to be supported and here is a list
 +of devices which have been tested during the production of this boot loader.
 +
 +<columns 50% 50% ->
 +
 +<code>
 +dsPIC30F1010
 +dsPIC33EP128GP502
 +dsPIC33EV256GM002
 +dsPIC33EV256GM102
 +dsPIC33FJ06GS101A
 +dsPIC33FJ128GP802
 +dsPIC33FJ16GS502
 +dsPIC33FJ32MC102
 +</code>
 +
 +<newcolumn>
 +
 +<code>
 +
 +PIC24F04KA201
 +PIC24F16KL402
 +PIC24FJ128GA202
 +PIC24FJ16MC101
 +PIC24FJ256GA702
 +PIC24FJ64GA002
 +PIC24FV08KM101
 +PIC24FV32KA302
 +PIC24HJ128GP502
 +
 +</code>
 +
 +</columns>
  
 === Licence === === Licence ===
Line 19: Line 55:
 === Credits and Thanks === === Credits and Thanks ===
  
-Oxford Boot Loader is developed by Darron M Broad with contributions from Gerhard Bertelsmann.+Oxford Boot Loader has been developed by Darron M Broad and is a port of [[:projects:wellington|Wellington]] boot loader developed by Darron M Broad with contributions from Gerhard Bertelsmann.
  
 I am grateful to Chiculita Claudiu for Tiny PIC Bootloader as Oxford Boot Loader uses a protocol derived from Tiny PIC bootloader. I am grateful to Chiculita Claudiu for Tiny PIC Bootloader as Oxford Boot Loader uses a protocol derived from Tiny PIC bootloader.
 +
 +=== Checkout ===
 +
 +Oxford boot loader is obtained using mercurial.
 +
 +<code>
 +hg clone http://hg.kewl.org/pub/oxford
 +cd oxford
 +</code>
  
 === Configure === === Configure ===
Line 40: Line 85:
  
 Follow the guide given in the template files to create the correct boot loader Follow the guide given in the template files to create the correct boot loader
-firmware for your target then build the boot loader.+firmware for your target then build the boot loader. [[:tools:xc16|XC16]] must 
 +be installed to perform this operation.
  
 <code> <code>