You are here: start » projects » mork

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
projects:mork [2016/02/17 06:01]
darron [Mork Microchip PIC32MX ICSP] 		projects:mork [2017/01/12 22:44] (current)
Line 14: Line 14:
 Both STM32 boards are inexpensive boards which don't cost much more than the [[:boards:nano|Nano 3.0]] yet they are far more powerful. Both STM32 boards are inexpensive boards which don't cost much more than the [[:boards:nano|Nano 3.0]] yet they are far more powerful.
  
-One complication though for the [[:boards:vcc-gnd|vcc-gnd]], is that it comes with a serial boot loader which is not accessible via it's USB port. This means that another device is required to program the [[:boards:vcc-gnd|vcc-gnd]] which can be an [[:tools:stlink|STLink]] compatible device or, if using a 3V3 UART, [[:tools:stm32flash|STM32Flash]].+One complication though for the [[:boards:vcc-gnd|vcc-gnd]], is that it comes with a serial boot loader which is not accessible via its USB port. This means that another device is required to program the [[:boards:vcc-gnd|vcc-gnd]] which can be an [[:tools:stlink|STLink]] compatible device or, if using a 3V3 UART, [[:tools:stm32flash|STM32Flash]].
  
 The [[:boards:vcc-gnd|vcc-gnd]] page shows both examples of programming the board. The [[:boards:vcc-gnd|vcc-gnd]] page shows both examples of programming the board.
Line 101: Line 101:
  
 Later versions of Windows are not available to test. Later versions of Windows are not available to test.
 +