You are here: start » projects » gpio-bb

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Last revision Both sides next revision
projects:gpio-bb [2021/07/12 15:17]
darron [Raspbian for Raspberry Pi] 		projects:gpio-bb [2023/11/05 16:20]
darron [Raspberry Pi OS]
Line 7: Line 7:
 GPIO bit-bang is well suited to PICMicro ICSP but not exclusively. GPIO bit-bang is well suited to PICMicro ICSP but not exclusively.
  
-=== Raspbian for Raspberry Pi ===+=== Build === 
 + 
 +This module is built out of kernel and depends on the header files and tools found locally or may be cross compiled. 
 + 
 +For cross compilation, an example Makefile named `cross-compile.mk' is provided which should work for Raspberry PI OS as explained [[:tools:raspbian#kernel|here]]. 
 + 
 +If the linux source directory was cross compiled and then copied to the target system to build the module, `scripts.sh' is provided to rebuild certain kernel header scripts locally. This is needed because some scripts are actually binary files on the foreign architecture. 
 + 
 + 
 + 
 +=== Raspberry Pi OS===
  
 First install development tools and the kernel headers when using a regular kernel. First install development tools and the kernel headers when using a regular kernel.
Line 29: Line 39:
 </code> </code>
  
-=== Void Linux for Raspberry Pi ===+=== Armbian ===
  
-First install development tools and the kernel headers. +==BPI==
-<code> +
-xbps-install mercurial make gcc rpi-kernel-headers  +
-</code>+
  
-Now install the kernel module. 
 <code> <code>
-hg clone http://hg.kewl.org/pub/gpio-bb +apt install  linux-headers-current-sunxi
-cd gpio-bb +
-./rpi-void.sh +
-</code> +
- +
-=== Bananian for Banana Pi === +
- +
-Install development tools and the kernel headers and then install the kernel module. +
- +
-<code> +
-hg clone http://hg.kewl.org/pub/gpio-bb +
-cd gpio-bb +
-./bpi-bananian.sh +
-</code> +
- +
-=== Armbian for Orange Pi Zero === +
- +
-Install development tools and then install the kernel module. +
- +
-<code> +
-hg clone http://hg.kewl.org/pub/gpio-bb +
-cd gpio-bb+
 make make
 make install make install
Line 74: Line 59:
 </code> </code>
  
-=== OpenWRT === +=== Obsolete documentation === 
-[[projects:gpio-bb:openwrt|GPIO bit-bang driver for OpenWRT]] +[[projects:gpio-bb:armbian|Armbian]] 
- +[[projects:gpio-bb:bananian|Bananian]] 
-=== Raspbian for Raspberry Pi (obsolete) === +[[projects:gpio-bb:openwrt|OpenWRT]] 
-[[projects:gpio-bb:raspbian|GPIO bit-bang driver for Raspbian]]+[[projects:gpio-bb:raspbian|Raspbian]]
  
 === Troubleshooting === === Troubleshooting ===
  
-gpio-bb uses the kernel API to access pins, this API demands +gpio-bb uses the kernel API to access pins, this API demands exclusive access to a pin per process. This means you cannot use gpio-bb and sysfs export simultaneously for a single pin.
-exclusive access to a pin per process. This means you cannot use +
-gpio-bb and sysfs export simultaneously for a single pin.+
  
 === Resources === === Resources ===
  
 [[https://www.pedalpc.com/blog/program-pic-raspberry-pi/#gpio-bb|Using gpio-bb]] [[https://www.pedalpc.com/blog/program-pic-raspberry-pi/#gpio-bb|Using gpio-bb]]