You are here: start » projects » can-can

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
projects:can-can [2015/01/22 21:01]
darron 		projects:can-can [2022/12/07 23:19] (current)
darron [Documentation]
Line 1: Line 1:
 ==== Can-can CAN bus interface ==== ==== Can-can CAN bus interface ====
 <wrap right> <wrap right>
-{{:projects:humble-can-prototype.jpg?250}}+{{:projects:humble-can-prototype.jpg?200}} 
 +\\ \\ 
 +{{:projects:pcb.jpg?200}}
 </wrap> </wrap>
  
Line 21: Line 23:
  
 In this mode, the Can-can interface is a dedicated CAN bus device in In this mode, the Can-can interface is a dedicated CAN bus device in
-it's own right. This is placed on the bus to perform special purpose+its own right. This is placed on the bus to perform special purpose
 duties such as taking measurements and logging events etc. duties such as taking measurements and logging events etc.
  
Line 40: Line 42:
  
 Documentation will appear here soon. Documentation will appear here soon.
 +
 +
 +=== Resources ===
 +
 +[[https://ww1.microchip.com/downloads/en/DeviceDoc/20005167C.pdf|MCP2561/2 datasheet]]