You are here: start » interfaces » pony

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
interfaces:pony [2014/12/20 19:59]
darron 		interfaces:pony [2015/03/22 21:55] (current)
Line 1: Line 1:
-==== Pony ====+==== Pony Serial ====
 <wrap right> <wrap right>
 {{:interfaces:pony.jpg?200}} {{:interfaces:pony.jpg?200}}
 </wrap> </wrap>
  
-Pony is a serial interface adapter for ATMEL ISP.+Pony Serial is an interface adapter for ATMEL ISP.
  
 It only works with a motherboard UART or equivalent. It only works with a motherboard UART or equivalent.
 +
 +=== Linux ===
  
 == Program == == Program ==
 <code> <code>
-avrdude -P /dev/ttyS0 -c ponyser -p ATMEGA328P -e -u -U lock:w:0x3F:m -U efuse:w:0x05:m -U hfuse:w:0xDE:m -U lfuse:w:0xFF:m -U flash:w:$(BOOTLOADER) -U lock:w:0x2F:m+avrdude -P /dev/ttyS0 -c ponyser ...
 </code> </code>
 +
 +=== Resources ===
 +
 +[[https://www.olimex.com/Products/AVR/Programmers/AVR-PG1B/resources/AVR-PG1B-sch.gif|Schematic]]\\
 +[[https://www.olimex.com/Products/AVR/Programmers/AVR-PG1B/resources/AVR-PG1B.pdf|Manual]]
 +
 +