You are here: start » interfaces » pican

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
interfaces:pican [2022/12/07 16:45]
darron [Pinout] 		interfaces:pican [2022/12/07 17:39] (current)
darron [Termination]
Line 45: Line 45:
 ===Termination=== ===Termination===
  
-There is a termination resistor closed using JP3.+There is a termination resistor closed with JP3.
  
 === Test === === Test ===
Line 67: Line 67:
  
 === Pinout === === Pinout ===
 +<wrap right>
 +{{:interfaces:pican_std.jpg?100}}
 +\\ \\
 +{{:interfaces:pican_odb2.jpg?100}}
 +</wrap>
  
 DB9 male socket DB9 male socket
  
 <code> <code>
-5 4 3 2 1 +1 2 3 4 5 
- 9 8 7 6+ 6 7 8 9
  
-                OBDII+STANDARD        OBDII
 2 CAN L         2 GND          SJ1 2 CAN L         2 GND          SJ1
 3 GND           3 CAN H        SJ2 3 GND           3 CAN H        SJ2
-6 GND           5 CAN L        SJ3 +7 CAN H         5 CAN L        SJ3
-7 CAN H+
  
 Solder bridges must be created to select the function of the socket. Solder bridges must be created to select the function of the socket.
 </code> </code>
 === Resources === === Resources ===
 +
 +[[https://web.archive.org/web/20160104025419/http://www.skpang.co.uk/catalog/pican-canbus-board-for-raspberry-pi-p-1196.html|Product page]]
  
 [[https://wiki.kewl.org/downloads/pican_rev_B.pdf|Schematic]] [[https://wiki.kewl.org/downloads/pican_rev_B.pdf|Schematic]]