You are here: start » interfaces » pi-lm75

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Last revision Both sides next revision
interfaces:pi-lm75 [2016/01/21 20:09]
darron 		interfaces:pi-lm75 [2022/08/25 22:49]
darron [TEMPERATURE]
Line 1: Line 1:
-==== Pi LM75 temperature sensor module ====+==== LM75 temperature sensor module ====
 <wrap right> <wrap right>
 {{:interfaces:lm75.jpg?200}} {{:interfaces:lm75.jpg?200}}
Line 8: Line 8:
 It's not very accurate. It's not very accurate.
  
 +===CONFIG===
 +<code>
 +dtparam=i2c_arm=on
 +#dtparam=i2c_vc=on
 +</code>
 +
 +===TOOLS===
 +
 +<code>
 +apt install i2c-tools lm-sensors
 +</code>
 +
 +===TEST===
 +
 +<code>
 +i2cdetect -y 1
 +     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
 +00:                         -- -- -- -- -- -- -- --
 +10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
 +20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
 +30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
 +40: -- -- -- -- -- -- -- -- 48 -- -- -- -- -- -- --
 +50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
 +60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
 +70: -- -- -- -- -- -- -- --
 +</code>
 +
 +===SETUP===
 +
 +<code>
 +echo lm75 0x48 > /sys/class/i2c-adapter/i2c-1/new_device
 +</code>
 +
 +<code>
 +find /sys/class/i2c-adapter/i2c-1/1-0048/hwmon/
 +/sys/class/i2c-adapter/i2c-1/1-0048/hwmon/
 +/sys/class/i2c-adapter/i2c-1/1-0048/hwmon/hwmon2
 +/sys/class/i2c-adapter/i2c-1/1-0048/hwmon/hwmon2/device
 +/sys/class/i2c-adapter/i2c-1/1-0048/hwmon/hwmon2/temp1_max
 +/sys/class/i2c-adapter/i2c-1/1-0048/hwmon/hwmon2/subsystem
 +/sys/class/i2c-adapter/i2c-1/1-0048/hwmon/hwmon2/update_interval
 +/sys/class/i2c-adapter/i2c-1/1-0048/hwmon/hwmon2/power
 +/sys/class/i2c-adapter/i2c-1/1-0048/hwmon/hwmon2/power/runtime_suspended_time
 +/sys/class/i2c-adapter/i2c-1/1-0048/hwmon/hwmon2/power/autosuspend_delay_ms
 +/sys/class/i2c-adapter/i2c-1/1-0048/hwmon/hwmon2/power/runtime_active_time
 +/sys/class/i2c-adapter/i2c-1/1-0048/hwmon/hwmon2/power/control
 +/sys/class/i2c-adapter/i2c-1/1-0048/hwmon/hwmon2/power/runtime_status
 +/sys/class/i2c-adapter/i2c-1/1-0048/hwmon/hwmon2/temp1_max_hyst
 +/sys/class/i2c-adapter/i2c-1/1-0048/hwmon/hwmon2/uevent
 +/sys/class/i2c-adapter/i2c-1/1-0048/hwmon/hwmon2/temp1_input
 +/sys/class/i2c-adapter/i2c-1/1-0048/hwmon/hwmon2/name
 +</code>
 +
 +<code>
 +watch -n 1 /usr/bin/sensors
 +</code>
 +
 +===MEASURE===
 +
 +<code>
 +Every 1.0s: /usr/bin/sensors
 +
 +lm75-i2c-1-48
 +Adapter: bcm2835 (i2c@7e804000)
 +temp1:        +31.5°C  (high = +80.0°C, hyst = +75.0°C)
 +
 +cpu_thermal-virtual-0
 +Adapter: Virtual device
 +temp1:        +38.9°C
 +
 +rpi_volt-isa-0000
 +Adapter: ISA adapter
 +in0:              N/A
 +</code>