You are here: start » interfaces » mh-sensor

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
interfaces:mh-sensor [2016/01/21 14:22]
darron [Flying Fish MH Sensor] 		interfaces:mh-sensor [2016/04/22 12:07] (current)
darron [Moisture detector]
Line 2: Line 2:
 <wrap right> <wrap right>
 {{:interfaces:mh-sensor.jpg?200}} {{:interfaces:mh-sensor.jpg?200}}
 +\\ \\
 +{{:interfaces:ivy.jpg?200}}
 </wrap> </wrap>
  
Line 7: Line 9:
 and a pot to give both an analogue and digital (threshold) output. and a pot to give both an analogue and digital (threshold) output.
  
-Various sensor configurations can be found which include an LDR, NTC thermistor, and +Various sensor configurations can be found which include an LDR, NTC thermistor,  
-two resistive water/moisture detectors.+two resistive water/moisture detectors and more besides.
  
 The water/moisture detectors utilise a 2 pin header which can allow us to reuse the The water/moisture detectors utilise a 2 pin header which can allow us to reuse the
-comparator board for any particular device we have available. For example, the picture+comparator board for any particular device we have available. For example, the top picture
 shows a flat style 10K thermistor along with the moisture detector kit. shows a flat style 10K thermistor along with the moisture detector kit.
  
Line 17: Line 19:
 two inputs to the comparator have a similar magnitude. two inputs to the comparator have a similar magnitude.
 ===Schematic=== ===Schematic===
 +
 +This is a reversed engineered schematic, the capacitor values are unknown.
  
 {{:interfaces:mh-sensor.png?200}} {{:interfaces:mh-sensor.png?200}}
 +
 +===Moisture detector===
 +
 +After 3 months of use all I can say is this probe is mostly unusable, the
 +resistance value appears to be make little sense until at least you notice that
 +the probe is corroding. I have placed a second probe in the soil but this time
 +I have insulated the probe header (the other rusted) and now have the probe
 +against the inside edge of the pot rather than anywhere near the middle, maybe it will last longer...
 +
 +Conclusion. The moisture probes are a waste of time.