Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
interfaces:fs1000a [2016/03/23 19:55] darron |
interfaces:fs1000a [2016/03/23 19:55] (current) darron |
||
|---|---|---|---|
| Line 22: | Line 22: | ||
| To complement the FS1000A, the RF-5V (or equivalent) exists. This receiver | To complement the FS1000A, the RF-5V (or equivalent) exists. This receiver | ||
| - | module works okay at 3V3 for short distances but is rated for 5V operation. It would appear | + | module works okay at 3V3 for short distances but is rated for 5V operation |
| + | which is needed for longer distances. It would appear | ||
| that 5V is required to operate the AGC circuit on the board. The AGC can | that 5V is required to operate the AGC circuit on the board. The AGC can | ||
| produce high levels of noise on the output when no signal is broadcast from | produce high levels of noise on the output when no signal is broadcast from | ||
