This is an old revision of the document!


Table of Contents

ARM Amba UART

amba.jpg

These UARTs are found on systems such as the Raspberry Pi.

RPi

By default, the UART is used as the Linux console, this must be disabled to allow general purpose operation.

The following script run as root can solve this.

#!/bin/sh
C=`awk '{ for (i = 1; i <= NF; ++i) { if ($i !~ /ttyAMA0/) { printf $i" " } } printf "\n" }' /boot/cmdline.txt`
echo $C > /boot/cmdline.txt
sed -i 's/^T0:23:respawn:/#T0:23:respawn:/' /etc/inittab

High speed modes of operation are also not enabled by default and these should be enabled.

echo "init_uart_clock=64000000" >> /boot/config.txt

Reboot the RPi to apply all the settings.

Resources

This website uses cookies for visitor traffic analysis. By using the website, you agree with storing the cookies on your computer.More information