==== Can-can CAN bus interface ====
<wrap right>
{{:projects:humble-can-prototype.jpg?200}}
\\ \\
{{:projects:pcb.jpg?200}}
</wrap>

The Can-can CAN bus interface is a simple but general purpose interface
for the [[:boards:rpi|Raspberry Pi]] and OpenWRT. 

The interface has two modes of operation.

  - Host mode
  - Standalone mode

== Host mode ==

In host mode a Can-can interface connects to a host device which may
be an RPi or OpenWRT router where the interface acts as a bridge
between the host and the CAN bus. 

== Standalone mode ==

In this mode, the Can-can interface is a dedicated CAN bus device in
its own right. This is placed on the bus to perform special purpose
duties such as taking measurements and logging events etc.

In this mode a host mode device is also required for communication.

=== Licence ===

The Can-can bus interface project is licensed under the [[:projects:can-can:licence|CC BY-NC-SA 4.0]]. You must read and accept the terms of this licence agreement before using any of the licensed materials from this project.

=== Credits and Thanks ===

Can-can is developed and maintained by Darron M Broad.

Host mode was inspired by Gerhard Bertelsmann's easy-can
interface which this project has realised.

=== Documentation ===

Documentation will appear here soon.


=== Resources ===

[[https://ww1.microchip.com/downloads/en/DeviceDoc/20005167C.pdf|MCP2561/2 datasheet]]