RisingHF LRWAN GS HF1
This SX1301 LoRaWAN gateway daughterboard comes attached to NUCLEO-F746ZG as part of the P-NUCLEO-LRWAN2 kit.
This product is considered obsolete since the gateway firmware on the NUCLEO-F746ZG has not been updated since 2018 and it is not fully compatible with modern services, however, it is compatible with this LoRaWAN server.
Setup
- Refer to the LRWAN2 user manual and configure the jumpers.
- Connect the ethernet to the LAN.
- Power up the RisingHF daughterboard with a 1A PSU.
- Connect the ST-LINK to a PC as a terminal console.
A 2A RPi3 PSU is ideal to power the gateway.
Jumpers
On the NUCLEO-F746ZG board, verify the jumper settings:
JP1 (PWR-EXT) OFF JP3 (power source) on VIN-5V JP5 (IDD) ON
Console
The ST-LINK port acts as a terminal console which is used to configure the gateway from a PC.
picocom -b 115200 /dev/ttyACM1
Boot
_/_/_/ _/_/_/ _/_/_/ _/_/_/ _/ _/ _/_/_/ _/ _/ _/_/_/
_/ _/ _/ _/ _/ _/_/ _/ _/ _/ _/ _/
_/_/_/ _/ _/_/ _/ _/ _/ _/ _/ _/_/ _/_/_/_/ _/_/_/
_/ _/ _/ _/ _/ _/ _/_/ _/ _/ _/ _/ _/
_/ _/ _/_/_/ _/_/_/ _/_/_/ _/ _/ _/_/_/ _/ _/ _/
Powered by RisingHF & STMicroelectronics
-------------------------------------------------------------------------------
VERSION: 2.1.7, Nov 6 2018
LOG: OFF
AT ECHO: ON
BAUDRATE: 115200bps
MACADDR: xx:xx:xx:xx:xx:xx
ETHERNET: DHCP
DNS1: 114.114.114.114
DNS2: 8.8.8.8
NTP SERVER: 1.ubuntu.pool.ntp.org
EUI PADDING: {3, FF}, {4, FF}
GATEWAY ID: xxxxxxxxxxxxxxxx
LORAWAN: Public
LORAWAN SERVER: eu1.loriot.io
UPLINK UDP PORT: 1780
DOWNLINK UDP PORT: 1780
CHANNEL0: 867100000, A, SF7/SF12, BW125KHz (LORA_MULTI_SF)
CHANNEL1: 867300000, A, SF7/SF12, BW125KHz (LORA_MULTI_SF)
CHANNEL2: 867500000, A, SF7/SF12, BW125KHz (LORA_MULTI_SF)
CHANNEL3: 867700000, A, SF7/SF12, BW125KHz (LORA_MULTI_SF)
CHANNEL4: 867900000, A, SF7/SF12, BW125KHz (LORA_MULTI_SF)
CHANNEL5: 868100000, B, SF7/SF12, BW125KHz (LORA_MULTI_SF)
CHANNEL6: 868300000, B, SF7/SF12, BW125KHz (LORA_MULTI_SF)
CHANNEL7: 868500000, B, SF7/SF12, BW125KHz (LORA_MULTI_SF)
CHANNEL8: 868300000, B, SF7, BW250KHz (LORA_STANDARD)
CHANNEL9: 868800000, B, 50Kbps (FSK)
-------------------------------------------------------------------------------
Concentrator starting...
Concentrator Radio A type SX1257
Concentrator Radio B type SX1257
Concentrator started (2926ms)
ST LoRa GW V2
Ethernet starting...
Ethernet started
DHCP IP: 192.168.0.254
Downlink UDP Connected
Uplink UDP Connected
Help
AT+HELP
+HELP: OK
AT -- AT Ping
HELP -- Print command list
-> AT+HELP
FDEFAULT -- Restore factory default
-> AT+FDEFAULT
RESET -- Reset gateway
-> AT+RESET
SYS -- Check device configuration
-> AT+SYS
VER -- Version
-> AT+VER
LOG -- Logging
-> AT+LOG
-> AT+LOG=ON
-> AT+LOG=OFF
ECHO -- AT echo on/ff
-> AT+ECHO
-> AT+ECHO=ON
-> AT+ECHO=OFF
MAC -- MAC address
-> AT+MAC
-> AT+MAC=mac_address
IP -- Gateway DHCP/STATIC ip
-> AT+IP
-> AT+IP=DHCP
-> AT+IP=STATIC,ip,netmask,gateway
DNS -- DNS record
-> AT+DNS
-> AT+DNS=dns1,dns2
NTP -- NTP server address
-> AT+NTP
-> AT+NTP=ntp_server_address
EUI -- MACADDRESS (EUI48) to EUI64 padding
-> AT+EUI
-> AT+EUI=pos0,val0_hex,pos1,val1_hex
LORAWAN -- LORAWAN Public/Private
-> AT+LORAWAN
-> AT+LORAWAN=PUBLIC
-> AT+LORAWAN=PRIVATE
PKTFWD -- Packet forwarder server address and port
-> AT+PKTFWD
-> AT+PKTFWD=address,port_up,[port_down]
CH -- Packet forwarder channels
-> AT+CH
-> AT+CH=0~7,freq,radio // Set multi SF LoRa channel
-> AT+CH=8,freq,radio,sf,bw // Set standard LoRa channel
-> AT+CH=9,freq,radio // Set FSK channel
-> AT+CH=0~9,0 // Turn off a channel
-> AT+CH=0~9,OFF // Turn off a channel
-> AT+CH=EU868|US915|EU433|CN780|AU915|AS923|KR920|CN470|IN866|CN470PREQUEL
BAUDRATE -- UART baudrate
-> AT+BAUDRATE
-> AT+BAUDRATE=new_br // MAX 4000000bps
Connect
This LoRaWAN server works with the gateway.
AT+PKTFWD=192.168.0.115,1680,1680 +PKTFWD: 192.168.0.115, 1680, 1680 AT+RESET
Firmware
Last known firmware for the NUCLEO-F746ZG host board.