boards:mspexp430fr5994

MSP-EXPFR5994 Launchpad Development Kit

MSP-EXPFR5994 Launchpad Development Kit

MSPDEBUG

Mspdebug can be used to program this device using its `eZ FET lite' interface, however, it doesn't appear to work reliably.

Mspdebug with the tilib interface does seem to work reliably, yet, if ez-fet mode was attempted before-hand the board will need a power cycle.

MSP430 FLASHER

MSP430 Flasher can program this device using TI TEXT files. It has the same issue if mspdebug eZ-FET mode was attempted previously, so do not do that.

Pinout

RST          GND 5V 3V3 RxD TxD SBW SBW
S3           eZ-FET Spy-Bi-Wire RST TST

        3V3  5V              P3.7 GND
        P1.2 GND             P3.6 P5.7
UCA3RXD P6.1 P3.0            P3.5 P4.4
UCA3TXD P6.0 P3.1            P3.4 P5.3
        P6.2 P3.2            P7.3 RST
        P1.3 P3.3            P2.6 P5.0
        P5.2 P1.4            P2.5 P5.1
        P6.3 P1.5            P4.3 P8.3
UCB2SCL P7.1 P4.7            P4.2 P8.2
UCB2SDA P7.0 P8.0            P4.1 P8.1
             SUPERCAP
             J8
             USE 3V3 CHARGE
P5.6                         P5.5
S1                           S2
     LED1
     J7
GND                          GND
GND                          GND
5V           microSD         3V3

LEDS
RED   P1.0 LED1
GREEN P1.1 LED2

eZ-FET VCP
TxD P2.0 UCA0TXD
RxD P2.1 UCA0RXD

microSD
DETECT P7.2
MOSI   P1.6 UCB0SIMO
MISO   P1.7 UCB0SOMI
CS     P4.0
CLK    P2.2 UCB0CLK