You are here: start » tools » mspflasher

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
tools:mspflasher [2023/11/10 13:01]
darron [Build] 		tools:mspflasher [2023/11/10 13:50] (current)
darron [Build]
Line 19: Line 19:
 First install [[https://wiki.kewl.org/dokuwiki/tools:mspds|libmsp430.so]]. First install [[https://wiki.kewl.org/dokuwiki/tools:mspds|libmsp430.so]].
  
-===Build===+===Extract===
  
-Extract files and apply makefile fix.+Extract files.
  
 <code> <code>
Line 32: Line 32:
  
 ===Patch=== ===Patch===
 +
 +Apply fixes.
  
 <code> <code>
Line 38: Line 40:
 </code> </code>
  
-===Patch=== 
- 
-This patch is required to stop the app entering an infinite loop. 
- 
-<code> 
- diff -u Support.cpp.orig Support.cpp 
---- Support.cpp.orig    2023-11-09 19:17:11.714300113 +0000 
-+++ Support.cpp 2023-11-09 19:18:32.873483304 +0000 
-@@ -304,7 +304,7 @@ 
-        } 
- 
-     // get parameter 
--    while ((cOpt = getopt(argc, ( char**)argv, g_cAllOpts, RTE)) != EOF ) 
-+    while ((cOpt = getopt(argc, ( char**)argv, g_cAllOpts, RTE)) != (char)EOF ) 
-     { 
-         // choose code for determined parameter 
-         switch (cOpt) 
-@@ -761,7 +761,7 @@ 
-     } 
- 
-     // get additional use case specific parameters 
--    while ((cOpt = getopt(argc, ( char**)argv, g_cAllOpts, RTE)) != EOF ) 
-+    while ((cOpt = getopt(argc, ( char**)argv, g_cAllOpts, RTE)) != (char)EOF ) 
-     { 
-         for(i = 0; i < g_lCountOpt; i++)                        // for every element of struct of additional parameters 
-         { 
-</code> 
- 
-Whether this patch is actually required was not tested. 
- 
-<code> 
-diff -u StdUseCase.cpp.orig StdUseCase.cpp 
---- StdUseCase.cpp.orig 2019-05-13 10:02:00.000000000 +0100 
-+++ StdUseCase.cpp      2023-11-09 19:20:18.204412719 +0000 
-@@ -388,6 +388,10 @@ 
-         StdUseCase_Exit(EXIT_INITIALIZE, 0); 
-     } 
- 
-+    // load device database 
-+    MSP430_LoadDeviceDb(NULL); 
-+    Print_N_Log(STD_MSG,"* Loaded device database.\n"); 
-+ 
-     // set interface speed 
-     if(sOpt->pcFETspeed != NULL) 
-     { 
-</code> 
  
 ===Install=== ===Install===
Line 93: Line 49:
 cp ../MSP430Flasher /usr/local/bin/ cp ../MSP430Flasher /usr/local/bin/
 </code> </code>
-===Usage=== 
- 
-When you run this app unpatched with args it will enter an infinite loop, 
-hence it's useless without the fixes found on the TI forum. 
- 
-Whether the target works or not in Linux is also dependant upon the 
-firmware version in the target which can be upgraded via 
-libmsp430.so using mspdebug. 
  
 ===Resources=== ===Resources===
Line 106: Line 54:
 [[https://www.ti.com/lit/ug/slau654e/slau654e.pdf|User guide]] [[https://www.ti.com/lit/ug/slau654e/slau654e.pdf|User guide]]
  
- +/* 
-[[https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/836999/msp430flasher-compiled-to-run-on-arm-architecture?tisearch=e2e-sitesearch&keymatch=MSP430-FLASHER|Patch notes]]+[[https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/836999/msp430flasher-compiled-to-run-on-arm-architecture?tisearch=e2e-sitesearch&keymatch=MSP430-FLASHER|TI Forum]] 
 +*/